Face Frames:
Constructed of 3/4” x 1 1/2” select kiln dried Oak, Maple, Hickory, Cherry, Alder, Rustic Alder or Rustic Hickory. The face frame joints are glued and then assembled using spacers to insure precise accuracy of all openings. All joints are then secured with self boring screws.
Cabinet Sides:
Cabinet sides are 1/2” 45 pound industrial particle board with natural Maple laminate on both sides. When assembled, the face frame dado receives a bead of glue and the end panel is aligned and pressed into place by a machine to insure a tight and accurate fit. The end panel is then stapled to the face frame. Exposed sides will have a matching wood specie exterior at no charge. Rustic Alder factory finished ends will use clear Alder material.
Wall Tops & Bottoms:
Constructed of 1/2” 45 pound industrial particle board with a natural Maple laminate on both sides. The end panel is dadoed and receives a bead of glue, then the tops and bottoms are inserted, aligned and pressed into place by a machine to insure a tight and accurate fit. They are then stapled to the face frame and to the back.
Base Cabinet Floors:
Base floors are 1/2” 45 pound industrial particle board with a natural Maple laminate one side. The floor is inserted into the face frame dado, which has received a bead of glue. It is then aligned and pressed and into place by a machine to insure a tight and accurate fit, they are then stapled to the face frame and to the back. The base floor completely encloses the cabinet in the toe kick area.
Cabinet Backs:
Cabinet backs are 1/2” 45 pound industrial grade particle board with a natural Maple laminate one side. The cabinet sides are dadoed to receive the back. A bead of glue is placed into the dado and along the back of the cabinet floor. The backs are slid into position and stapled to the end panels, top and bottom floor.
Shelving:
Shelving is 3/4” industrial grade particle board with a natural Maple laminate and matching edgebanded front edge. Both wall and base cabinet shelves are fully adjustable with durable clear plastic clips with metal posts. Temporary locking clips are included to hold the shelves in place during shipment. Base cabinets come standard with a half depth shelf. Optional full depth shelves are available
Drawers:
The standard drawer is a furniture quality four sided 5/8” solid Maple drawer box with dovetail construction and 1/4” wood veneered bottom. The dovetail joints are filled, sanded, and finished with a catalyzed finish.
Drawer Glides:
Drawer glides are under mount epoxy coated metal that are captured one side for easy closure and minimal side play. The cabinet member glide is placed into an adjustable socket that is secured to the cabinet back and screwed to the face frame. The drawer box member glide is securely attached with screws also. The drawer glide has a ¾ extension and a seventy five pound rated capacity. Tandem full extension under mount drawer glides with Soft Close are available, see the 1500 Accessory section.
Sliding Trays:
The standard tray is a furniture quality four sided 5/8” solid Maple drawer box with dovetail construction and 1/4” wood veneered bottom. The dovetail joints are filled, sanded and finished with a catalyzed finish. Drawer glides are epoxy coated steel that are self-adjusting, self-closing and 3/4 extension. The drawer glide has a 75 lb. rated capacity. Tandem under mount drawer glides with Soft Close are available, see the 1500 Accessory section.
Hinges:
Most doors are available with a 3-way adjustable concealed cup hinge with an integrated Soft Close feature. Inset doors are also available with a Finial Hinge in a choice of four finishes: oil rubbed bronze, bright brass, silver and wrought iron at no additional or minimal cost. Some restrictions apply to some overlays and profile options.
Finished Toe Kick:
Available in eight foot lengths at additional cost.
Finish:
Our finish is the same durable catalyzed varnish that is applied to fine furniture and hardwood floors. For detail of our finish, see the section on Finish Detail.
